LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B6284T; 2000-2001) >> Cylinder Head/Gasket, Replacement >> Installing the cylinder head gasket >> Installing The Cylinder Head

Installing The Cylinder Head

Fig 1: Cylinder Head Screws Tightening Sequence
GLL103883Courtesy of VOLVO CARS OF NORTH AMERICA.

Install a new cylinder head gasket.

Install the cylinder head. Use new screws.

Lubricate and install all the screws.

Tighten the screws in the order illustrated.

Tighten the screws in the following order. 

1. 20 Nm  .

2. 60 Nm  .

3. Angle tighten 130°  . Use a bevel protractor 9512050 .

scientia non olet · About LEMON Manuals