LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B6284T; 2000-2001) >> Cylinder Head/Gasket, Replacement >> Installing the cylinder head gasket >> Installing The Coolant Pump Intake Pipe

Installing The Coolant Pump Intake Pipe

Fig 1: Coolant Pump Inlet Pipe
GLL102978Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

Apply thread sealant 1161 056 on the screws.

Install 

scientia non olet · About LEMON Manuals