LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B6284T; 2000-2001) >> Cylinder Head/Gasket, Replacement >> Installing the cylinder head gasket >> Installing The Camshaft Covers

Installing The Camshaft Covers

Fig 1: Removing/Installing Camshaft Cover/Cylinder Head
GLL103886Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the camshaft lobes, the camshaft bearing surfaces and the valve lifters.

Install the camshaft cover.

Install press tool 9995454 (2x).

Tighten the camshaft cover screws alternately, keeping it parallel to the cylinder head with the press tools.

Install all the screws and tighten.

Install the variable valve timing solenoid with a new gasket.

Remove the press tools.

Install the spark plugs. Tighten to 30 Nm  .

scientia non olet · About LEMON Manuals