LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B6284T; 1999) >> Cylinder Head/Gasket, Replacing >> Installing The Cylinder Head Gasket >> Installing Valve Lifters And Camshafts

Installing Valve Lifters And Camshafts

Fig 1: Identifying Intake And Exhaust Camshafts
GLL102937Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the valve guide wells.

Install all valve lifters

Lubricate the camshaft bearing seats.

Install the intake camshaft. Ensure that the groove at the back of the camshaft is above  an imaginary center line

Position the exhaust camshaft. Ensure that the groove at the back of the camshaft is below  an imaginary center line.

scientia non olet · About LEMON Manuals