LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Crank Mechanism (B6294S2; B6294T; 2002-2006) >> Oil Pump / Crankshaft Seal, Front, Replacing >> Finishing

Oil Pump / Crankshaft Seal, Front, Replacing: Finishing

Fig 1: Installing Pulley For Auxiliaries Belt
GLL108808Courtesy of VOLVO CARS OF NORTH AMERICA.

Install a new timing belt  . See Installing the timing belt .

Install the pulley for the auxiliaries belt. Locate the steering gear on the locating pin in the timing gear pulley.

Install the auxiliaries belt.

Install counterhold 9995433 .

Tighten the crankshaft center nut. Tighten to 300 Nm  .

Install the vibration damper using new screws  . Tighten to 35 Nm  . Angle-tighten 50°  . Use the crankshaft center nut as a counterhold.

scientia non olet · About LEMON Manuals