Installing The Front Camshaft Seal

Fig 1: Camshafts And Special Tools 99 5718 And 995719

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lift up and position the brake fluid reservoir and the expansion tank on top of the engine.

Use drift 9995718 for camshaft with variable valve timing unit and drift 9995719 for camshaft without variable valve timing unit.

Use new seals and lubricate the surface of the seal that the camshaft rotates against.

Use the variable valve timing unit / timing belt pulley mounting screws. Tighten the screws until the drift bottoms out.

Remove the drift.