Installing the camshaft press

Fig 1: Identifying Camshaft Turned Until Stopped Against Camshaft Press

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the lower section of the camshaft press 9995765 at the inlet valves for cylinder 1.

Tighten the tool against the cylinder head. Tighten to 17 Nm  .

Turn the camshaft until it stops against the camshaft press.

Fig 2: Identifying Camshaft Tightening Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upper section of the camshaft press.

Tighten the screw which tensions the camshaft. Tighten to 12 Nm  .