LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Cleaning, Inspection And Adjustment >> Valve Clearance (B6284T; 6294S; 2000-2001) >> Checking Valve Clearance >> Setting Up The Engine In Test Mode

Setting Up The Engine In Test Mode

Fig 1: Installing Tool 999 5755 At Rear Edge Of Intake Camshaft
GLL103905Courtesy of VOLVO CARS OF NORTH AMERICA.

Install tool 9995755 at the rear edge of the intake camshaft.

Turn the crankshaft in the direction of engine rotation (clockwise) until the marking on the tool ("In1/Ex3") is opposite the thin flange running straight over the entire top of the cylinder head.

Remove all plugs from the test holes.

NOTE:

If the crankshaft is turned to far, it is essential that it is turned back at least a quarter of a turn so that it can then be turned clockwise to the correct position.

scientia non olet · About LEMON Manuals