LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Cleaning, Inspection And Adjustment >> Transmission (B6284T; 1999) >> Variable Valve Timing Unit, Checking And Adjusting >> Installing And Adjusting The Variable Valve Timing Unit/Gear Pulley On The Camshafts >> Installing The Crankshaft Adjustment Tool

Installing The Crankshaft Adjustment Tool

Remove the starter motor mounting screws. Pull out the starter motor and put it aside.

Remove the blind cover plug for the adjustment tool hole. Turn the crankshaft clockwise slightly. Install the 9995451 . Ensure the adjustment tool bottoms against the engine block.

scientia non olet · About LEMON Manuals