LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubricating And Oil System - Removal, Replacement And Installation >> Oil Pump And Line (B6284T; B6304S3; 1999) >> Oil Pump / Crankshaft Seal, Front, Replacing >> When Only Replacing The Front Crankshaft Seal

When Only Replacing The Front Crankshaft Seal

Fig 1: Identifying Seal Installation Using Tool 9995455
GLL108709Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the old seal. Use extractor 9995919 .

Clean sealing surfaces.

Lubricate and install the new seal. Use drift 9995455 .

Press in drift and seal with crankshaft center nut.

NOTE:

Ensure that the crankshaft does not rotate when pressing in the crankshaft seal.

scientia non olet · About LEMON Manuals