Installing The Oil Pump

Fig 1: Identifying Oil Pump And Special Tool 999 5455

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install a new gasket .

Carefully insert the oil pump over the end of the crankshaft.

NOTE:

The sealing ring in the oil pump is very easy to damage if not installed correctly.

Install four new screws as a guide.

Pull in the oil pump with drift 9995455 and the crankshaft center nut.

Tighten the oil pump screws. Tighten to 10 Nm .

Install the timing gear pulley. Carefully tap alternately around the timing gear pulley until reaching its end position.

NOTE:

The timing gear pulley can only be in one position on the crankshaft end splines.