LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubricating And Oil System - Removal, Replacement And Installation >> Oil Pump And Line (B5254T2; 2004-2006) >> Oil Pump / Crankshaft Seal, Front, Replacing >> Install The Vibration Damper

Install The Vibration Damper

Fig 1: Identifying Vibration Damper & Counterhold 9995433
GLL108712Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the vibration damper.

Tighten the center nut to 180 Nm  .

Use counterhold 9995433 .

Remove the counterhold. Tighten the screws. Tighten to 25 Nm  .

Angle-tighten 30°  . Use bevel protractor 9512050 .

scientia non olet · About LEMON Manuals