Removing The Engine Cooling Fan (FC)

Fig 1: Evaporative Emission System Valve And Engine Cooling Fan Shroud

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the intake pipe for the air cleaner housing (ACL). Disconnect both the connectors for the engine cooling fan (FC).

Remove:

The evaporative emission system (EVAP) valve from the engine cooling fan (FC) shroud
the hose clamps and charge air pipe/hose on the right-hand side (turbo charged engines only).

Fig 2: Expansion Tank Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the four tie straps that hold the cable harness secure at the fan shroud.

NOTE:

Certain vehicles have three tie straps and a clip holding the cable harness at the fan shroud.

Lift out the hose for the expansion tank from the holders on top of the fan shroud

Remove:

Release the hose for the coolant reservoir from the fan shroud.