Cooling System - Draining, Charging And Bleeding: Notes
Operation Number(s): 26012-2
| Special tools | |
|---|---|
| T9512957 COOLANT FILLER Tool number: T9512957 Tool description: COOLANT FILLER Tool boards: |
|
| T9512953 COVER Tool number: T9512953 Tool description: COVER Tool boards: |
|
NOTE:
Removal steps in this procedure may contain installation details.
WARNING:
Anti-freeze (glycol) can be fatal if swallowed. Seek medical attention immediately.
WARNING:
Great care must be taken when handling hot fluids.
WARNING:
Anti-freeze can be absorbed through the skin in dangerous and harmful quantities. Always immediately wash off spilled fluid from affected skin.
WARNING:
Vapor can be emitted from the coolant's anti-freeze when heated. Avoid inhaling these vapors.
WARNING:
Used anti-freeze must be handled according to the applicable environmental regulations. Anti-freeze must not come into contact with the exhaust system.
WARNING:
When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth.
Coolant must only be mixed with water of the correct quality. Water quality