Reading off the programmed values

NOTE: Read off the programmed values from the upper electronic module (UEM) before replacing the control module.

Fig 1: Identifying Ignition ON

GLL101051

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition on
Click on the symbol for VCT2000 to read off the programmed values.
The retained values are programmed customer parameters in the upper electronic module (UEM). The retained values should be noted for later use.

Other information
- For information about programming the customer parameters, see Diagnostic functions .
Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Replacing control modules and downloading software