Cable Terminals box, p/n 9814232
Contents
The table below shows which cable terminals are included in the kit, and the tool used for the different cable terminals.
| Cable terminal Type |
Cable terminal Part no. |
Compartment * 5 in box | Cable area mm 2 | Terminal removal tool | Crimp tool |
| 2.8 Timer | 978257-4 | 1 | 0.5 - 1.0 | 9814228 * 1 or 9814229 * 2 | 9814225 (yellow) |
| 978258-2 | 2 | 1.0 - 2.5 | |||
| 978365-5 | 3 | 2.5 - 3.0 | |||
| 2.8 Tab | 969780-6 | 4 | 0.5 - 1.0 | 9814229 * 2 * 4 | 9814223 (black) |
| 969781-4 | 5 | 1.0 - 2.5 | |||
| 968374-9 | 6 | 2.5 - 3.0 | |||
| 2.8 Timer SWS | 970778-7 | 7 | 0.5 - 1.0 | 9814228* 1 | 9814224 (red) |
| 970779-5 | 8 | 1.0 - 2.5 | |||
| 2.8 Tab SWS | 974312-1 | 9 | 0.5 - 1.0 | 9814229 * 2 * 4 | 9814224 (red) |
| 974313-9 | 10 | 1.0 - 2.5 | |||
| 2.8 Tab steel SWS | 978298-8 | 11 | 0.5 - 1.0 | 9814228 * 1 | 9814224 (red) |
| 978299-6 | 12 | 1.0 - 2.5 | |||
| 1.6 Pin o | 3523257-8 | 13 | 0.75 - 1.5 | No tool required | 9814226 (green) |
| 3523699-1 | 14 | 1.6 - 2.5 | |||
| 1.6 Socket | 3515890-6 | 15 | 0.75 - 1.5 | No tool required | 9814226 (green) |
| 3523698-3 | 16 | 1.6 - 2.5 | |||
| 17 | |||||
| 18 |
Selecting a terminal removal tool:
* 1 When the cavity opening has two extraction groove
* 2 When the cavity opening has one extraction groove
* 3 When the cavity opening is round
* 4 For tab terminals in receptacle housings with half-open contact side
* 5 Compartment, box in kit:
| 1 | 2 | 3 | 4 | 5 | 6 |
| 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 |