Checking relay and wires
Check wires to fog lamp for an open circuit Open-circuit, permanent faults , short circuit to ground Short-circuit to ground, permanent faults , and Contact resistance and oxidation .
Check relay (2/34).
HINT: The voltage across the relay should be 12 V at pins 1 and 3 when the fog lamp is on.
Check the wire between 3 and fuse number 3 in the interior compartment fuse box (11 C/3).
Check that the fuse is intact.
Check the wire between relay 1 (2/34) and front fog lamp 1 (10/5 left front fog lamp and 10/6 right front fog lamp).
HINT: Ground connection to fog lamp at 2.
Check the connector.