Repairing the cable harness

NOTE: If an airbag(s) has deployed, the cable harness must be checked. See Checking the collision cable .

NOTE: If an airbag(s) has deployed, the status of the reserve battery must be checked. See Checking the reserve battery .

Fig 1: Identifying SRS Control Module Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

The following pins are for Volvo On Call:

Connector at SRS control module: Pin B28 (yellow/white cable).

Connector at keypad: Pin 17 (yellow/white cable).

Fig 2: Identifying Connector Pins

Courtesy of VOLVO CARS OF NORTH AMERICA.

Repair the cable harness as described in Cable harness SRS system, repair .

NOTE: The cable between the phone module (PHM) and SRS module (yellow/white) is joined in the cable harness and is routed to the central electronic module.