Integrated relay/fusebox in engine compartment: Holder
- Disconnect the battery lead. See Battery, replacing
- Remove the cover from the fusebox
- Remove the battery leads from the holder
- Remove the screws from the holder.
- Lift up/detach the holder and seals for the cable harnesses
- Release the connectors.
Main fuse
- Release the holder. See Holder .NOTE: The connectors do not need to be disconnected.
- Remove the nuts for the fuse
- Remove the fuse.
Main fuse location, 11A
- Decals at respective integrated relay/fusebox in the car,
- Pocket data book,
- Owner's Manual.
Capacitor
- Remove the holder from the lower section. See Lower section
- Disconnect the capacitor from the lower section/mounting hooks.