Checking cable and component
Check the power supply cable between rear electronic module (REM) connector terminal #31 (#D31) and inclination sensor module (ISM) connector terminal #1. Check for a short-circuit to ground.
Remedy as necessary.
Other information
- See Connecting the breakout box
- See Signal specification
- Disconnecting the rear electronic module (REM):
- For -2004, see: Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing
- For 2005-, see: Rear electronic module (REM), replacing .
- See Checking wiring and terminals
- Continue
Refer to Verification