Checking cable and component
NOTE:
Only fault-trace the circuit of the door displaying the faulty value.
Left rear door
Check the signal cable between rear electronic module (REM) connector terminal #43 (#C3) and terminal #2 on the lock mechanism connector. Check for a short-circuit to supply voltage. Check for an open-circuit.
Right rear door
Check the signal cable between rear electronic module (REM) connector terminal #33 (#D33) and terminal #2 on the lock mechanism connector. Check for a short-circuit to supply voltage. Check for an open-circuit.
Remedy as necessary.
Other information
- See Connecting the breakout box
- See Signal specification
- See Lock mechanism rear side door, replacing
- Disconnecting the rear electronic module (REM):
- For -2004, see: Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing
- For 2005-, see: Rear electronic module (REM), replacing .
- See Checking wiring and terminals
- Continue
Refer to Verification