Checking the wiring and terminals

If the fault is intermittent, it has been registered previously but is no longer present. The fault is evaluated depending on how it occurs.

Check the cable between the central electronic module (CEM) and lighting in the cup holder/ashtray. Check for a short-circuit to ground.

Take readings between:

• Central electronic module (CEM) #D12 (#12) and the lighting in the cup holder/ashtray.

Check the connection at the LED and ensure that the cables are not short-circuited to each other.

Remedy as necessary.

Other information 

• See Connecting the breakout box
• -2004: Signal specification
• 2005-: Signal specification
• See Location of components
• See Checking wiring and terminals

• Continue 

  Refer to Verification