Checking wiring / back-up (reversing) light switch

Check the cable between the central electronic module (CEM) terminal #1A and the back-up (reversing) lamp switch terminal #2 (3/10). Check for an intermittent short-circuit to ground.

Also check the back-up (reversing) lamp switch. Check for an intermittent short-circuit to ground.

Remedy as necessary.

Other information: 

• For information about the central electronic module (CEM), see Central electronic module (CEM), replacing
• To access the back-up (reversing) lamp switch, see Back-up lamp switch, replacing .

Fig 1: Back-Up Lamp Switch

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Ground Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Information