Replacing the component

Replace the relays for locking (2/111) and unlocking (2/112) in the boot relay/fuse box. At the same time check relay socket contacts for contact resistance and oxidation as described in Contact resistance and oxidation .

Additional information 

• To access relay/fuse box in the boot, see Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing .

Fig 1: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Relays

Courtesy of VOLVO CARS OF NORTH AMERICA.

Is there a fault? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Circuit test