Checking the wiring

Fig 1: Identifying Ignition OFF

GLL101045

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Disconnecting Connector

GLL101071

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Check the fuse for voltage feed to fuel pump/fuel pump module.
Disconnect central electronic module (CEM) connector A.
Check central electronic module (CEM) connector A and the connectors for the fuel pump (FP). Check for contact resistance. Check for oxidation. Check for damaged or loose connections.

Check the cable. Check for an open-circuit. Check for a short-circuit to ground.

Take readings between:
- Central electronic module (CEM) terminal #A16 (16) and fuel pump/fuel pump control module.
Remedy as necessary.

Other information
- See Connecting the breakout box
- -2004: Signal specification
- 2005-: Signal specification
- See Location of components
- See Checking wiring and terminals
Fig 3: Identifying Connector A
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Verification