Checking the function of the supplemental restraint system module (SRS)

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reconnect the connectors. Reinstall the components
• Ignition on.

  Check the power supply to the control module by turning the ignition key to ignition position II.

  The indicator lamp in the driver information module (DIM) must light up. The lamp must go out after a few seconds.

Does the indicator lamp go out? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Information