Checking contact resistance, oxidation and wiring

Check the handset and keypad unit/carphone module connectors for loose connections according to Loose connections (terminals)  .

Check the wiring between hands-free #F2 and keypad unit #A13 for an open-circuit according to Open-circuit, intermittent faults .

Remedy as necessary.

Other information: 

• To access/replace the hands-free unit, see Handsfree microphone .
• To access/replace the keypad/carphone module, see Radio/carphone, replacing .
• To connect the breakout box, see Connecting the breakout box, Carphone module .
• For information about signals and connectors, see Keypad unit /Carphone control module (PHM) (for hands-free loudspeaker and handset) and Handsfree speakers (for keypad unit / carphone module (PHM)) .

Fig 1: Identifying Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.