Programming distance conditions for service (miles)

There are three programmable service parameters. This parameter is used to set the number of miles a car can be driven before the Service Reminder Indicator (SRI) is lit. (Service reminder lamp)

2,500, 5,000, 6000, 7,500 10,000 or 12000 miles can be selected.

Read off the parameter that is programmed.

To change the service parameter, mark the desired value in the scrolling list and start programming.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Programming the service time parameters