Diagnostic Trouble Code (DTC) Information DIM-0007

Condition

Fig 1: Brake Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

The illustrations in this service information are used for different model years and / or models. Some variation may occur. However, the essential information in the illustrations is always correct.

The diagnostic trouble code (DTC) is stored if the control module detects that one of the global parameters used by the driver's information module (DIM) is not updated or defined.

Substitute Value

None.

Possible Source

Communication fault
Incorrectly downloaded software in the central electronic module (CEM) (Carconfig).

Fault symptom[s]

The driver information module (DIM) is not functioning.