Diagnostic Trouble Code (DTC) Information DIM-0001
Condition
NOTE:
The illustrations in this service information are used for different model years and / or models. Some variation may occur. However, the essential information in the illustrations is always correct.
The diagnostic trouble code (DTC) is stored if the driver information module (DIM) registers that the stored mileage value differs by more than 500 km from the most recently stored mileage. The diagnostic trouble code (DTC) is also stored if the voltage to the driver information module (DIM) is interrupted before the new mileage is stored in the central electronic module (CEM).
Substitute Value
- None.
Possible Source
- Software fault in the control module.
Fault symptom[s]
- No symptom.