Replacing head unit
Check that the MD/CD is not blocked.
An internal program fault has been found in the head unit/audio control module.
If no fault is found replace the head unit/audio module.
CAUTION:
New head unit/audio control modules are supplied without software. The head unit/audio control module must be programmed after it has been replaced.
Other information:
- For information about programming and replacing the head unit/audio control module:
- For -2004, see:Radio cassette player, replacing .
- For 2005-, see:Audio unit, replacing .
Continue when the fault has been remedied.
- Continue
Refer to Verification