Removing the battery
NOTE:
To determine whether or not the battery is working, the performance of the battery must be checked in accordance with: Fault-tracing and testing the battery
(if not performed earlier).
Fold up the floor hatch
Remove:
- the nut (1) which attaches the mounting to the floor and undo the nut holding the mounting to the rear crossmember
- the mounting.
Bend up the terminal cover (3).
CAUTION:
For removing/installing battery cables, see Battery, disconnecting
.
Pull the drain hose off the side of the battery
Remove:
- the battery cables from the battery terminals
- the screw and the bracket.
Lift out the battery.