Action for worn splines in sleeve

Fig 1: Providing Protection Against Grinding Chips Entering Transmission

Courtesy of VOLVO CARS OF NORTH AMERICA.

Cut a Ø 40 mm piece of cardboard and use as protection to prevent grinding chips from ending up in the transmission. Apply a thick bead of grease or Vaseline on the seal in the sleeve. Press the piece of cardboard against the seal.

Fig 2: Grinding A Groove In Inside Of Sleeve To Enable Expander 999 5777 To Get A Hold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Grind a groove in the inside of the sleeve to enable the expander 9995777 to get a hold.

The sleeve can also be heated with a hot-air gun or induction heater.