LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Seal CV joint housing, replacing >> Removal >> Removing the sealing ring for the CV joint housing from the wheel spindle

Removing the sealing ring for the CV joint housing from the wheel spindle

Fig 1: Identifying Rubber Seal & Constant Velocity Joint
GLL106610Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully remove the sealing ring.

NOTE: The sealing ring will be used again during installation.