LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Center Differential (Ambulance; 2003-2004) >> Temperature/pressure sensor active on demand coupling, replacing >> Removal >> Removing the control module

Removing the control module

Fig 1: Active On Demand Coupling Control Module Screws
GLL109941Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE: Clean the area around the control module thoroughly before beginning removal.

Position a container underneath the Active on Demand Coupling. Disconnect the connectors for the control module and the oil pump.

Remove: