LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Center Differential (Ambulance; 2003-2004) >> Pinion seal coupling (AOC), replacing >> Installation >> Installing the seal

Installing the seal

Fig 1: Installing Seal Using Drift 999 7025
GLL109927Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the new seal using oil for the Active on Demand Coupling, P/N 116 1641 (1 liter pack).

Use drift 9997025 for installation. Tap the seal into place until the surface of the drift is against the housing for Active on Demand Coupling.

scientia non olet · About LEMON Manuals