LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Center Differential (Ambulance; 2001-2002) >> Final drive, transferring components >> Installing the viscous coupling housing and coupling

Installing the viscous coupling housing and coupling

Fig 1: Positioning Final Drive With Viscous Coupling Housing And Coupling On A Workbench
GLL109835Courtesy of VOLVO CARS OF NORTH AMERICA.

Position the new final drive on a workbench. Support the front with a wooden block.

Lubricate the pinion seal lip with wheel bearing grease (P/N 1161241-3).

Install the unit. Tighten the screws. Tighten to 25 Nm  .

scientia non olet · About LEMON Manuals