Installing members and the exhaust system

Fig 1: Exhaust Pipe/Catalyst

Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten the screws for the support for the center bearing. Tighten to 25 Nm  .

Tighten the screws for the propeller shaft center bearing. Tighten to 25 Nm  .

Install: 

• the front member on the bodywork, the exhaust pipe and the three-way catalytic converter (TWC). Tighten to 25 Nm 
• the brake pipe in the mountings in the member
• the rear exhaust pipe assembly.