LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Right Drive Shaft Pilot Bearing - Removal And Installation >> Driveshaft/Axles >> Right drive shaft pilot bearing, replacing >> Reassembly >> Press the boot onto the constant velocity joint

Press the boot onto the constant velocity joint

Fig 1: Installing New Clamp Using Pliers 951 2619
GLL109799Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that it is in position.

Install the new clamp. Use pliers 9512619 .

scientia non olet · About LEMON Manuals