LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Left- Hand Drive Shaft - Removal And Installation >> Driveline/Axles >> Drive shaft, left, replacing >> Removal >> Removing the drive shaft from the wheel hub

Removing the drive shaft from the wheel hub

Fig 1: Identifying Spring Strut And Drive Shaft Removal
GLL109616Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull out the spring strut and remove the drive shaft from the hub. Hold the spring strut to one side using a tensioning strap for more space when removing the drive shaft.

CAUTION:

On later version vehicles, there is a rubber seal on the outer constant velocity joint. Do not damage the seal. It will be needed for installation.

scientia non olet · About LEMON Manuals