Install the integrated relay/fusebox

Fig 1: Identifying Integrated Relay/Fusebox

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Align the box in the bracket (2). Push the box to the side. Release the box so that it aligns in the bracket (3)
• Install the screws. Tighten to 10 Nm 
• Install the positive cables and the nut. Tighten to 25 Nm 
• Connect the connector.

Finishing work 

Remove the pedal jack.

Bleed the brake system 

See Brake system, bleeding (using bleeding unit) .

Wash off any spilled brake fluid. Use warm water and car shampoo.

Function test 

See Function test  .