Checking the 30-supply (pump motor) to the control module

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.

  Connect a voltmeter between terminals #25 and #8 on the breakout box.

  Fig 2: Breakout Box

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Voltage Display

  Courtesy of VOLVO CARS OF NORTH AMERICA.

The voltmeter should read approximately battery voltage. 

• OK 

  FAULT NOT FOUND:  Troubleshooting has been completed.

• NOT OK 

  Refer to Checking fuses