Faulty signal. Permanent fault: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.
• Read off the status of the pedal pressure sensor.
• Press the brake pedal down and then release it.
  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Brake Booster

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Has the status changed? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information