Checking the brakes and wheel bearings
HINT: A sticking brake or the parking brake may have blocked one or both wheels during driving. This means that the wheel sensor signal has defaulted.
Check that the parking brake is not stuck or applied.
Check that the brake calliper is not stuck thus blocking the wheels.
Check that there is no play in the wheel bearing of the relevant wheel and that it is not stuck.
Do the necessary corrective action.
Additional information:
- To check/adjust the parking brake, see Replacing brake cables .
- To check/replace the brake calliper, see Replacing the rear brake calipers .
- To check/adjust the rear wheel bearings, see Rear wheel hub, replacing .
- Continue
Refer to Verification