Checking the brakes and wheel bearings
HINT: A sticking brake or parking brake may have locked one or both wheels during driving. This will mean that the wheel sensor signal is not transmitted.
Check that the parking brake is not sticking or in contact with anything.
Check that the brake calipers are not sticking and locking the wheels.
Check the wheel bearing on the relevant wheel for play. Check that the wheel rotates freely and is not sticking.
Remedy as necessary.
Other information:
- To check and adjust the parking brake, see Replacing brake cables
- To check and replace the brake caliper, see Replacing the rear brake calipers
- To check and adjust the rear wheel bearings, see Rear wheel hub, replacing .
- Continue
Refer to Verification