Checking wiring and terminals
Check the control module and the relevant wheel sensor connectors. Check for intermittent contact resistance and oxidation according to Contact resistance and oxidation .
Check the wiring between the relevant wheel sensor connectors:
Diagnostic Trouble Code (DTC) ABS-0010 Front left wheel sensor
terminal #2 and control module terminal #1
Diagnostic Trouble Code (DTC) ABS-0020 Front right wheel sensor
terminal #1 and control module terminal #20
check for an intermittent open-circuit according to Open-circuit, intermittent faults . Check for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults . Check for an intermittent short-circuit to supply according to Short-circuit to supply voltage, intermittent faults .
Check the wiring between the relevant wheel sensor connectors:
Diagnostic Trouble Code (DTC) ABS-0010 Front left wheel sensor
terminal #2 and control module terminal #1
Diagnostic Trouble Code (DTC) ABS-0020 Front right wheel sensor
terminal #2 and control module terminal #19
check for an intermittent open-circuit according to Open-circuit, intermittent faults . Check for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults . Check for an intermittent short-circuit to supply according to Short-circuit to supply voltage, intermittent faults .
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the ABS breakout box .
- For other values, see Signal specification, ABS control module .
- Continue
Refer to Information