Brake Pads, Front
NOTE:
The brake pads are measured in place in the brake caliper.
The graphics show where to measure the thickness of the pad.
NOTE:
The brake pad's backing plate is not included in the dimensions.
EXAMPLE AT 20,000 KM SERVICE INTERVAL
| The wear is given in mm on the brake pad for the next service interval.
NOTE:
2 mm (replacement limit) must be added to all dimensions.
|
||
| S60/V70/XC70 | = | 4 mm + 2 mm |
| S60 R/V70 R | = | 3 mm + 2 mm |
| S80 (-06) | = | 4 mm + 2 mm |
| XC90 | = | 6 mm + 2 mm |
EXAMPLE AT 30,000 KM SERVICE INTERVAL
| The wear is given in mm on the brake pad for the next service interval.
NOTE:
2 mm (replacement limit) must be added to all dimensions.
|
||
| S60/V70/XC70 | = | 6 mm + 2 mm |
| S60 R/V70 R | = | 5 mm + 2 mm |
| S80 (-06) | = | 6 mm + 2 mm |
| XC90 | = | 9 mm + 2 mm |