Installing the brake disc
NOTE:
Be careful when handling the new brake disc. Careless handling can cause damage to the brake disc (out-of-true).
Install:
- the new brake disc. Tighten the locating pin. See Tightening torque
- the caliper holder. Use 2 new mounting screws. Tighten. See Tightening torque .
Depress the brake pedal a few times. Check the fluid level in the brake fluid reservoir. Top up if necessary.
NOTE:
The parking brake must be adjusted if the parking brake adjustment was released.
See Handbrake, brake shoes, replacing .
Reinstall the panel covering the parking brake lever. See Parking brake lever, replacing .