Install the brake disc

Fig 1: Identifying Caliper Holder And Brake Disc Removal

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the new brake disc. Tighten the locating pin (5). Tighten to 8 Nm 
• the caliper holder. Use new mounting screws (4). Tighten to 100 Nm  .

Install the brake pads and brake caliper 

See Refit the brake lining and brake caliper .

Install the locating pins in the brake caliper 

See Install the locating pins in the brake caliper .

Install the wheel 

See Installing wheels