LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Wheel Brake - Cleaning, Inspection And Adjustment >> Mechanical Checks And Adjustments (1999-2006) >> Rear wheel hub, measuring lateral runout >> Install the bracket included in the test equipment

Install the bracket included in the test equipment

Fig 1: Bracket On Mounting Hole For Brake Caliper
GLL104463Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the bracket on the mounting hole for the brake caliper. Use the M8 screws and nuts included in the kit: 9995507 .

NOTE: The lower nut is specially manufactured and should be located in the bracket.
Fig 2: Dial Gauge In Bracket
GLL104459Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the dial gauge in the bracket as shown.

scientia non olet · About LEMON Manuals